EN-GJS-350-22 | 5.3102 Material Datasheet
Unlock Exclusive Materials Data
Gain access to a wealth of materials data by joining our Materials Portal.
Register for Free or Upgrade for Full AccessMaterial Description
| Material Number | Material Number (single) | Standard | Range of Application | Standard Status | Country | Predecessor | Remark |
|---|---|---|---|---|---|---|---|
| 5.3102 (DIN EN 1563 : 2019-04) | 5.3102 | DIN EN 1563 : 2019-04 | Supersedes DIN EN 1563 : 2012-03 | Valid | Germany | EN-GJS-350-22 | EN-GJS-350-22 is a ferritic spheroidal cast iron. Application: engine parts, casting parts for electrical engineering, crankshafts, hydraulic castings, gears |
Chemical Composition
| Source | Remark |
|---|---|
| blur | blur |
Mechanical Properties
| Semi-finished Product | Nominal Size [mm] | Temperature [°C] | Tensile Strength [MPa] | Yield Strength (0.2% offset) [MPa] | Elongation A [%] | Shear Strength [MPa] | Torsion Strength [MPa] | Hardness HB | HBW | Source |
|---|---|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
Physical Properties
| Temperature [°C] | Density [g/cm³] | Young's Modulus [GPa] | Poisson's Ratio | Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] | Thermal Conductivity [W/(m*K)] | Specific Electrical Resistance [µΩm] | Mean Specific Heat Capacity [kJ/(kg*K)] | Source |
|---|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur | blur | blur |
Young's Modulus [GPa] vs Temperature [°C]
Exclusive Insight Locked!
This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.
Unlock NowMean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]
Exclusive Insight Locked!
This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.
Unlock NowMagnetic Properties
| Temperature [°C] | Max. Permeability [µH/m] | Hysteresis losses at B=1T [J/m³] | Source |
|---|---|---|---|
| blur | blur | blur | blur |
Toughness Data (Impact)
| Semi-finished Product | Nominal Size [mm] | Temperature [°C] | Specimen Shape | Notch Impact Energy [J] | Impact Energy [J] | Source |
|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur |
| blur | blur | blur | blur | blur | blur | blur |
Cross Reference
| Material Name | Country | Standard | Source |
|---|---|---|---|
| QT350-22 | China | GB/T 1348 | Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag |
| QT350-22A | China | GB/T 1348 | Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag |
| C01351 | China | GB/T 1348 | Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach |
| EN-GJS-350-22 | Europe | EN 1563 | |
| GJS350-22 | Europe | ||
| JS350-22 | Europe | ||
| EN-JS1010 | Europe | ||
| EN-JS1032 | Europe | ||
| JS1010 | Europe | ||
| JS1032 | Europe | ||
| EN-GJS-350-22 | Germany | AD 2000 W 3/2 | |
| SG350/22 | India | IS 1865 | Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag |
| JS/350-22/S | International | ISO 1083 | Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag |
| JS/350-22/U | International | ISO 1083 | Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag |
| FCD350-22 | Japan | JIS G 5502 | Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag |
| VC35 (VČ35, ВЧ35) | Russia | GOST 7293 | Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag |
| VČ35 | Russia | GOST 7293 | Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag |
| ВЧ35 | Russia | ГОСТ 7293 | Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag |
Producer/Supplier/Trade names
| Tradename | Supplier |
|---|---|
| EN-GJS-350-22 | FONDIUM Singen GmbH, Singen |
| EN-GJS-350-22 | GF Casting Solutions Leipzig GmbH, Leipzig |
| EN-GJS-350-22 | Reinhard Tweer GmbH, Bielefeld |
Material Compliance
| REACh | RoHS |
|---|---|
| blur | blur |
FKM Guideline Fatigue Strength
| Temperature [°C] | Tensile Strength [MPa] | Yield Strength (0.2% offset) [MPa] | Fatigue Limit under rev. Tension-Compression Stresses [MPa] | Fatigue Strength under pulsating Tensile Stresses [MPa] | Bending Fatigue Strength [MPa] | Shear Fatigue Strength [MPa] | Torsion Fatigue Strength [MPa] | Source | Remark |
|---|---|---|---|---|---|---|---|---|---|
| blur | blur | blur | blur | blur | blur | blur | blur | blur | blur |
Fracture Toughness
| Temperature [°C] | Plane-Strain Fracture Toughness KIc [MPa*m^½] | Source |
|---|---|---|
| blur | blur | blur |
EN-GJS-350-22 (5.3102; DIN EN 1563 : 2019-04)
Linear-elastic
| Temperature [°C] | Young's modulus [GPa] | Poisson's ratio |
|---|---|---|
| blur | blur | blur |
| blur | blur | blur |
Alternating stress
| Temperature [°C] | Stress ratio | Alternating stress [MPa] | Cycles |
|---|---|---|---|
| blur | blur | blur | blur |
| blur | blur | blur | blur |
| blur | blur | blur | blur |
Yield strength
| Temperature [°C] | 0.2% Proof strength [MPa] |
|---|---|
| blur | blur |
| blur | blur |
| blur | blur |
| blur | blur |
| blur | blur |
| blur | blur |
| blur | blur |
| blur | blur |
| blur | blur |
Electrical resistivity
| Temperature [°C] | Specific electrical resistance [µΩm] |
|---|---|
| blur | blur |
Coefficient thermal expansion
| Related Temperature [°C] | Temperature [°C] | Coefficient thermal expansion [10^-6*K^-1] |
|---|---|---|
| blur | blur | blur |
Specific heat
| Temperature [°C] | Specific heat [kJ/(kg*K)] |
|---|---|
| blur | blur |
| blur | blur |
Density
| Temperature [°C] | Density [g/cm³] |
|---|---|
| blur | blur |
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
| blur | blur |
Thermal conductivity
| Temperature [°C] | Thermal conductivity [W/(m*K)] |
|---|---|
| blur | blur |
Classification
| WIAM Material | Source description |
|---|---|
| blur | blur |
Designation
| Designation | Material number | Source |
|---|---|---|
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
| blur | blur | blur |
EN-GJS-350-22 (casting; 0.000-30.000mm)
Yield strength
| Temperature [°C] | 0.2% Proof strength [MPa] |
|---|---|
| blur | blur |
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
| blur | blur |
| blur | blur |
Classification
| Semi-finished product | Dimension [mm] | Source description |
|---|---|---|
| blur | blur | blur |
EN-GJS-350-22 (casting; 30.000-60.000mm)
Yield strength
| Temperature [°C] | 0.2% Proof strength [MPa] |
|---|---|
| blur | blur |
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
| blur | blur |
| blur | blur |
Classification
| Semi-finished product | Dimension [mm] | Source description |
|---|---|---|
| blur | blur | blur |
EN-GJS-350-22 (casting; 60.000-200.000mm)
Yield strength
| Temperature [°C] | 0.2% Proof strength [MPa] |
|---|---|
| blur | blur |
Tensile strength
| Temperature [°C] | Tensile strength [MPa] |
|---|---|
| blur | blur |
| blur | blur |
| blur | blur |
Classification
| Semi-finished product | Dimension [mm] | Source description |
|---|---|---|
| blur | blur | blur |
EN-GJS-350-22 (casting; 0.000-60.000mm)
Yield strength
| Temperature [°C] | 0.2% Proof strength [MPa] |
|---|---|
| blur | blur |
| blur | blur |
| blur | blur |
| blur | blur |
| blur | blur |
| blur | blur |
| blur | blur |
| blur | blur |
| blur | blur |
Classification
| Semi-finished product | Dimension [mm] | Source description |
|---|---|---|
| blur | blur | blur |