EN-GJS-400-18 | 5.3105 Material Datasheet

Material Standard Values

Material Models for Simulation

Unlock Exclusive Materials Data

Gain access to a wealth of materials data by joining our Materials Portal.

Material Description

Material Number	Material Number (single)	Standard	Range of Application	Standard Status	Country	Predecessor	Remark
5.3105 (DIN EN 1563 : 2019-04)	5.3105	DIN EN 1563 : 2019-04	Supersedes DIN EN 1563 : 2012-03	Valid	Germany	EN-GJS-400-18	EN-GJS-400-18 is a ferritic spheroidal cast iron. Application: engine parts, casting parts for electrical engineering, crankshafts, hydraulic castings, gears

Chemical Composition

Source	Remark
blur	blur

Mechanical Properties

Semi-finished Product	Nominal Size [mm]	Temperature [°C]	Tensile Strength [MPa]	Yield Strength (0.2% offset) [MPa]	Elongation A [%]	Compressive Strength [MPa]	Shear Strength [MPa]	Torsion Strength [MPa]	Hardness HB \| HBW	Source
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Physical Properties

Temperature [°C]	Density [g/cm³]	Young's Modulus [GPa]	Poisson's Ratio	Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1]	Thermal Conductivity [W/(m*K)]	Specific Electrical Resistance [µΩm]	Mean Specific Heat Capacity [kJ/(kg*K)]	Source
blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur

Young's Modulus [GPa] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Magnetic Properties

Max. Permeability [µH/m]	Hysteresis losses at B=1T [J/m³]	Source
blur	blur	blur

Toughness Data (Impact)

Semi-finished Product	Nominal Size [mm]	Temperature [°C]	Specimen Shape	Notch Impact Energy [J]	Impact Energy [J]	Source
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur

Cross Reference

Material Name	Country	Standard	Source
QT400-18	China	GB/T 1348	Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag
QT400-18A	China	GB/T 1348	Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag
C01402	China	GB/T 1348	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
EN-GJS-400-18	Europe	EN 1563
GJS400-18	Europe
JS400-18	Europe
EN-JS1020	Europe
EN-JS1062	Europe
JS1020	Europe
JS1062	Europe
EN-GJS-400-18	Germany	AD 2000 W 3/2
SG400/18	India	IS 1865	Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag
SG400/18A	India	IS 1865	Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag
JS/400-18/S	International	ISO 1083	Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag
JS/400-18/U	International	ISO 1083	Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag
FCD400-18	Japan	JIS G 5502	Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag
FCD400-18A	Japan	JIS G 5502	Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag
VC40	Russia	GOST 7293	Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag
VČ40	Russia	GOST 7293	Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag
ВЧ40	Russia	ГОСТ 7293	Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag
A395 Grade 60-40-18	USA	ASTM A395	Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag
A536 Grade 60-40-18	USA	ASTM A536	Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag
60-40-18	USA		Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag
Grade 60-40-18	USA		Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag
F32800	USA	UNS	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach

Producer/Supplier/Trade names

Tradename	Supplier
EN-GJS-400-18	FONDIUM Singen GmbH, Singen
EN-GJS-400-18	GF Casting Solutions Leipzig GmbH, Leipzig
EN-GJS-400-18	HULVERSHORN Eisengießerei GmbH & Co. KG, Bocholt
EN-GJS-400-18	Reinhard Tweer GmbH, Bielefeld
EN-GJS-400-18	Schmiedeberger Giesserei GmbH, Schmiedeberg

Material Compliance

REACh	RoHS
blur	blur

FKM Guideline Fatigue Strength

Semi-finished Product	Specimen Shape	Condition	Nominal Size [mm]	Temperature [°C]	Number of Cycles	Tensile Strength [MPa]	Yield Strength (0.2% offset) [MPa]	Elongation A [%]	Fatigue Limit under rev. Tension-Compression Stresses [MPa]	Fatigue Strength under pulsating Tensile Stresses [MPa]	Bending Fatigue Strength [MPa]	Shear Fatigue Strength [MPa]	Torsion Fatigue Strength [MPa]	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Fracture Toughness

Temperature [°C]	Yield Strength [MPa]	Tensile Strength [MPa]	Plane-Strain Fracture Toughness KIc [MPa*m^½]	Critical Stress Intensity Kc [MPa*m^½]	Source
blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur

EN-GJS-400-18 (5.3105; DIN EN 1563 : 2019-04)

Linear-elastic

Temperature [°C]	Young's modulus [GPa]	Poisson's ratio
blur	blur	blur
blur	blur	blur

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Electrical resistivity

Temperature [°C]	Specific electrical resistance [µΩm]
blur	blur

Coefficient thermal expansion

Related Temperature [°C]	Temperature [°C]	Coefficient thermal expansion [10^-6*K^-1]
blur	blur	blur

Specific heat

Temperature [°C]	Specific heat [kJ/(kg*K)]
blur	blur
blur	blur

Compressive strength

Temperature [°C]	Compressive ultimate strength [MPa]
blur	blur

Density

Temperature [°C]	Density [g/cm³]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur

Thermal conductivity

Temperature [°C]	Thermal conductivity [W/(m*K)]
blur	blur

Classification

WIAM Material	Source description
blur	blur

Designation

Designation	Material number	Source
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

EN-GJS-400-18 (casting; 0.000-30.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur

Classification

Semi-finished product	Dimension [mm]	Source description
blur	blur	blur

EN-GJS-400-18 (casting; 30.000-60.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur

Classification

Semi-finished product	Dimension [mm]	Source description
blur	blur	blur

EN-GJS-400-18 (casting; 60.000-200.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur

Classification

Semi-finished product	Dimension [mm]	Source description
blur	blur	blur

EN-GJS-400-18 (casting; 0.000-60.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

Semi-finished product	Dimension [mm]	Source description
blur	blur	blur

EN-GJS-400-18 (casting; 60.000-100.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

Semi-finished product	Dimension [mm]	Source description
blur	blur	blur

EN-GJS-400-18 | 5.3105 Material Datasheet

Material Standard Values

Material Models for Simulation

Material Description

Chemical Composition

Mechanical Properties

Physical Properties

Young's Modulus [GPa] vs Temperature [°C]

Mean Coefficient of Thermal Expansion (reference 20°C) [10^-6*K^-1] vs Temperature [°C]

Magnetic Properties

Toughness Data (Impact)

Cross Reference

Producer/Supplier/Trade names

Material Compliance

FKM Guideline Fatigue Strength

Fracture Toughness

EN-GJS-400-18 (5.3105; DIN EN 1563 : 2019-04)

Linear-elastic

Alternating stress

Yield strength

Electrical resistivity

Coefficient thermal expansion

Specific heat

Compressive strength

Density

Tensile strength

Thermal conductivity

Classification

Designation

EN-GJS-400-18 (casting; 0.000-30.000mm)

Yield strength

Tensile strength

Classification

EN-GJS-400-18 (casting; 30.000-60.000mm)

Yield strength

Tensile strength

Classification

EN-GJS-400-18 (casting; 60.000-200.000mm)

Yield strength

Tensile strength

Classification

EN-GJS-400-18 (casting; 0.000-60.000mm)

Yield strength

Classification

EN-GJS-400-18 (casting; 60.000-100.000mm)

Yield strength

Classification

Similar Materials