EN-GJS-400-18-LT | 5.3103 Material Datasheet

Material Standard Values

Material Models for Simulation

Unlock Exclusive Materials Data

Gain access to a wealth of materials data by joining our Materials Portal.

Material Description

Material Number	Material Number (single)	Standard	Range of Application	Standard Status	Country	Predecessor	Remark
5.3103 (DIN EN 1563 : 2019-04)	5.3103	DIN EN 1563 : 2019-04	Supersedes DIN EN 1563 : 2012-03	Valid	Germany	EN-GJS-400-18-LT	EN-GJS-400-18-LT is a cast iron with nodular graphite for low temperature application. Application: engine parts, casting parts for electrical engineering, crankshafts, hydraulic castings, gears

Chemical Composition

Source	Remark
blur	blur

Mechanical Properties

Semi-finished Product	Nominal Size [mm]	Temperature [°C]	Tensile Strength [MPa]	Yield Strength (0.2% offset) [MPa]	Elongation A [%]	Compressive Strength [MPa]	Shear Strength [MPa]	Torsion Strength [MPa]	Hardness HB \| HBW	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Physical Properties

Temperature [°C]	Young's Modulus [GPa]	Poisson's Ratio	Source
blur	blur	blur	blur
blur	blur	blur	blur

Young's Modulus [GPa] vs Temperature [°C]

Exclusive Insight Locked!

This premium diagram is currently blurred. Gain full access to detailed insights and stay ahead with exclusive content.

Unlock Now

Toughness Data (Impact)

Semi-finished Product	Nominal Size [mm]	Temperature [°C]	Specimen Shape	Notch Impact Energy [J]	Impact Energy [J]	Source
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur

Cross Reference

Material Name	Country	Standard	Source
QT400-18L	China	GB/T 1348	Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag
QT400-18AL	China	GB/T 1348	Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag
C01403	China	GB/T 1348	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach
EN-GJS-400-18-LT	Europe	EN 1563
SG400/18L	India	IS 1865	Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag
SG400/18AL	India	IS 1865	Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag
JS/400-18-LT/S	International	ISO 1083	Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag
JS/400-18-LT/U	International	ISO 1083	Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag
FCD400-18L	Japan	JIS G 5502	Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag
FCD400-18AL	Japan	JIS G 5502	Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag
GGG-40.3	Germany	DIN 1693-1
0.7043	Germany	DIN 1693-1
EN-GJS-400-18-LT	Germany	AD 2000 W 3/2
GJS400-18-LT	Europe
JS400-18-LT	Europe
EN-JS1025	Europe
EN-JS1049	Europe
JS1025	Europe
JS1049	Europe
VL NCI-2	International	DNV GL
A395 Grade 60-40-18	USA	ASTM A395	Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag
A536 Grade 60-40-18	USA	ASTM A536	Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag
60-40-18	USA		Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag
Grade 60-40-18	USA		Tirler, W.: Gusseisen, Internationale Werkstoffbezeichnungen und Normen. Beuth Pocket, DIN, Deutsches Institut für Normung e.V., 1. Aufl., Berlin, 2015, Beuth Verlag
F32800	USA	UNS	Stahlschlüssel 2016, Verlag Stahlschlüssel Wegst GmbH, Marbach

Producer/Supplier/Trade names

Tradename	Supplier
EN-GJS-400-18-LT	Eisenwerk Martinlamitz GmbH, Schwarzenbach/Saale
EN-GJS-400-18-LT	FONDIUM Singen GmbH, Singen
EN-GJS-400-18-LT	GF Casting Solutions Leipzig GmbH, Leipzig
EN-GJS-400-18-LT	Gießerei Heunisch, Steinach GmbH, Steinach
EN-GJS-400-18-LT	HULVERSHORN Eisengießerei GmbH & Co. KG, Bocholt
EN-GJS-400-18-LT	Heidenreich & Harbeck AG, Mölln
EN-GJS-400-18-LT	Meuselwitz Guß Eisengießerei GmbH, Meuselwitz
EN-GJS-400-18-LT	Olsberg Hermann Everken GmbH, Olsberg
EN-GJS-400-18-LT	Pleissner Guss GmbH, Herzberg am Harz
EN-GJS-400-18-LT	Procast Guss GmbH, Gütersloh
EN-GJS-400-18-LT	Reinhard Tweer GmbH, Bielefeld
EN-GJS-400-18-LT	Schubert & Salzer GmbH, Ingolstadt
EN-GJS-400-18-LT	Südguss GmbH, Neu-Ulm
EN-GJS-400-18-LT	Schmiedeberger Giesserei GmbH, Schmiedeberg

Material Compliance

REACh	RoHS
blur	blur

FKM Guideline Fatigue Strength

Temperature [°C]	Tensile Strength [MPa]	Yield Strength (0.2% offset) [MPa]	Fatigue Limit under rev. Tension-Compression Stresses [MPa]	Fatigue Strength under pulsating Tensile Stresses [MPa]	Bending Fatigue Strength [MPa]	Shear Fatigue Strength [MPa]	Torsion Fatigue Strength [MPa]	Source	Remark
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur
blur	blur	blur	blur	blur	blur	blur	blur	blur	blur

Fracture Toughness

Temperature [°C]	Plane-Strain Fracture Toughness KIc [MPa*m^½]	Source
blur	blur	blur
blur	blur	blur

EN-GJS-400-18-LT (5.3103; DIN EN 1563 : 2019-04)

Linear-elastic

Temperature [°C]	Young's modulus [GPa]	Poisson's ratio
blur	blur	blur
blur	blur	blur

Alternating stress

Temperature [°C]	Stress ratio	Alternating stress [MPa]	Cycles
blur	blur	blur	blur
blur	blur	blur	blur
blur	blur	blur	blur

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Compressive strength

Temperature [°C]	Compressive ultimate strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur

Classification

WIAM Material	Source description
blur	blur

Designation

Designation	Material number	Source
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur
blur	blur	blur

EN-GJS-400-18-LT (casting; 0.000-30.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur

Classification

Semi-finished product	Dimension [mm]	Source description
blur	blur	blur

EN-GJS-400-18-LT (casting; 30.000-60.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur

Classification

Semi-finished product	Dimension [mm]	Source description
blur	blur	blur

EN-GJS-400-18-LT (casting; 60.000-200.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur

Tensile strength

Temperature [°C]	Tensile strength [MPa]
blur	blur
blur	blur
blur	blur

Classification

Semi-finished product	Dimension [mm]	Source description
blur	blur	blur

EN-GJS-400-18-LT (casting; 0.000-60.000mm)

Yield strength

Temperature [°C]	0.2% Proof strength [MPa]
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur
blur	blur

Classification

Semi-finished product	Dimension [mm]	Source description
blur	blur	blur

EN-GJS-400-18-LT | 5.3103 Material Datasheet

Material Standard Values

Material Models for Simulation

Material Description

Chemical Composition

Mechanical Properties

Physical Properties

Young's Modulus [GPa] vs Temperature [°C]

Toughness Data (Impact)

Cross Reference

Producer/Supplier/Trade names

Material Compliance

FKM Guideline Fatigue Strength

Fracture Toughness

EN-GJS-400-18-LT (5.3103; DIN EN 1563 : 2019-04)

Linear-elastic

Alternating stress

Yield strength

Compressive strength

Tensile strength

Classification

Designation

EN-GJS-400-18-LT (casting; 0.000-30.000mm)

Yield strength

Tensile strength

Classification

EN-GJS-400-18-LT (casting; 30.000-60.000mm)

Yield strength

Tensile strength

Classification

EN-GJS-400-18-LT (casting; 60.000-200.000mm)

Yield strength

Tensile strength

Classification

EN-GJS-400-18-LT (casting; 0.000-60.000mm)

Yield strength

Classification

Similar Materials